Nokia 6100/6610 LCD PIC24H minibully
Nokia 6100 LCD running on a minibully
I recently bought a Nokia 6100 LCD from Ebay because I am in an LCD craze phase. Since I have no need for this LCD right now, I decided to port some code over to the PIC24H minibully from Sparkfun.
Parts
- Nokia 6100/6610 LCD from Ebay or Sparkfun. If the Ebay link ends up dead, use this search link.
- A minibully from Sparkfun. But any PIC24F/PIC24H board should do.
- A 5V power source. The LCD requires 5V to operate properly. The minibully can only supply 3.3V. I used the Adjustable breadboard power supply from Seeedstudio.
- A way to program the minibully serially. I used the USB BUB Board from Moderndevice.
Pins
Here is the pin mapping I used to connect the LCD. You can change what pins the LCD uses by changing the defines (LCD_RES, LCD_DIO, LCD_SCK, LCD_CS) inside lcd.h.
| Minibully | PIC | Function |
|---|---|---|
| 8 | B8 | RES |
| 9 | B9 | SDA/DIO |
| A2 | B0 | SCLK |
| A3 | B1 | CS |
Source
The code is based on the work done by AtomSoftTech. The person there made it for the PIC18F and I ported it to the minibully.
Posted on April 11th, 2010 at 11:22 am
Hey glad this was of use to you. I actually ported it from ARM7 LPC2418 Code… I will be re writing it soon to clean it up … ill be sure to post the new stuff on my site… Once again Nice Site and Glad i could help out
Jason (AtomSoft)´s last blog ..3mm 8×8 LED Matrix
Posted on November 21st, 2011 at 7:32 am
I received my first credit loans when I was 32 and this helped my relatives very much. However, I need the collateral loan as well.